Cementing products are used to support and protect well casings and the assist in isolating zones. To achieve the safest, most profitable wells, and maintaining environmentally safe zonal isolation, using the cementing process in the wellbore is key to its creation and maintenance. Regardless of your location or drilling environment, we are proud to offer a full range of cementing products and competitive prices that will maximize your results.
Anti-Foamer & De-Foamers |
||
| DCAF-34L | …………………. | Liquid De-Foamer |
Dispersants / Friction Reducers |
||
| DCD-33 | …………………. | Powder |
| DCD-33L | …………………. | Liquid, Polymer Type |
Fluid Loss Agents |
||
| CFL-115 | …………………. | Fluid Loss at < 180° F BHCT |
| CFL-160 | …………………. | Fluid Loss and Retarder at < 200° F BHCT |
| CFL-160L | …………………. | Liquid Form of CFL-160 |
| CFL-175 | …………………. | Fluid Loss at < 250° F BHCT |
| CFL-175L | …………………. | Liquid Form of CFL-175 |
| CPFL-344 | …………………. | Fluid Loss at High Temperatures |
| CFL-300L | …………………. | Liquid Form of CFL-300 |
Cement Retarders |
||
| SCR-HT | …………………. | High Temperature Borate Based Blend |
| DCR-270 | …………………. | Lignosulfonate Blend, 200° – 320° F |
| DCR-270L | …………………. | Liquid Form of CR-270 |
| CR-350 | …………………. | Non-Lignosulfonate for High Temp. |
| CR-350L | …………………. | Liquid Form of CR-350 |
| CRX-350 | …………………. | Borate Blend, > 300° F |
Gas Migration Control |
||
| CGC | …………………. | Liquid, Reduces Permeability |
| GMA-614 | …………………. | Latex additive for gas migration control |
| GMA-434 | …………………. | Latex Stabilizer for High Temperatures |
| CGC-D | …………………. | Powder |
| GASCON | …………………. | Polymer & Microfine Materials |
LOST CIRCULATION |
||
| Celluseal | …………………. | Cellophane Flakes |
| Flowstop-L | …………………. | Lost Circulation Aid, Pre-Flush Liquid |
| Flowstop-P | …………………. | Lost Circulation Aid, Pre-Flush Powder |
| Kol-Seal | …………………. | Lightweight Granular Solid |
| NY Fiber | …………………. | 1/2 Inch L x 23 Micron Dia. Filaments |
| Pol-E-Flake | …………………. | Polypropylene Flakes |
We have complete line of stimulation additives, including a variety of surfactants, viscosifiers (hydrocarbon and water), corrosion inhibitors, fluid loss additives, crosslinkers, buffers, breakers, clay stabilizers, anti-sludge additives, emulsifiers, friction reducers, iron control, micellar additives, and mutual solvents.
ACID CORROSION INHIBITORS
ACI-130 50° F – 350° F
ACI-130A < 300° F, Non-acetylenic
AI-260 Acid corrosion inhibitor for HCl, HF, organic and mud acids up to 350°F. Load rates 1 to 20 gpt. Cationic
ANTI-SLUDGE
AS-21A Anionic Surfactant Blend
CLAY CONTROL
CC-300T Claprotek CF KCl Substitute
CC-302T KCl Substitute, 70% Active
CC-310T KCl Substitute, TMAC, 50% Active
CC-330 Clay Stabilizer, Polymer
CSM-38 Concentrate
NEC-15 Clay Stabilizer & NE, Surfactant type
IRON CONTROL
IKC-50 Citric Acid Type
EMULSIFIERS
EA-771 A/O-100 Acid-in-Xylene Emulsifier
EA-770 Acid-in-Xylene Emulsifier
EA-780 Acid/Oil Dispersing Agent
FLUID LOSS CONTROL
FL-515 FLC Silica and Starch Based Fluid Loss
FL-500 FLC-500 Starch Blend
MISCELLANEOUS PRODUCTS
MM-900 Mud Acid Clean-Up
MM-870 De-Foamer
SSA-125 Fines Suspending Surfactant Blend
AR-101 Acid/Oil emulsifier. Load rates 1 to 5 gpt. Cationic
AR-102 HCl Acid retarder. Load rates 5 to 10 gpt. Cationic
AR-104 HCl gelling agent/retarder. Load rates 10 to 50 gpt. Cationic
AS-502 Acid anti-sludge agent. Load rates 5 to 25 gpt. Cationic
KCL-8001 Liquid KCl substitute. Load rates 0.5 to 10 gpt. 1gpt = 2% KCl Cationic
CS-700 Economical KCl substitute. Loate rates 1.0 to 10 gpt. 2 gpt =2% KCl Cationic
CS-720 Permanent clay stabilizer. Load rates 1 to 5 gpt. Cationic
FA-400 Foaming agent for water and acid brines. Stable to 350°F.
FA-410 Foaming agent for water and acid. For foam fracturing, foam acidizing, acid diverting, water wetting & removal of fines during well clean outs. Stable to 350°F. Load rates 2 to 10 gpt. Nonionic
MS-800 Micellar mutual solvent for well clean outs, acidizing & stimulation. Miscible with HCl, HF & mud acids. Load rates of 5 to 10% by volume. Cationic
NE-303 Oil soluble non-emulsifier for acidizing, stimulation and well clean out. Breaks/prevents water/brine/acid and hydrocarbon emulsions. Load rates 2 to 5 gpt. Nonionic
NE-310 Economical water & acid soluble non- emulsifier for acidizing & stimulation. Good for water block removal. Load rates 1 to 5 gpt. Nonionic
NE-320 Water & acid soluble non-emulsifier for acidizing & fracturing. Excellent surface tension reducer. May be used to spearhead treatment to lower break down pressures. Load rates 2 to 5 gpt. Nonionic
NE-330 Water & acid soluble non-emulsifier for acidizing & stimumation. Good for water block removal. May be used to spearhead treatment to lower break down pressures. Load rates 2 to 5 gpt. Cationic
PC-517 Oil soluble paraffin paraffin clean up product containing dispersants, wetting agents and polar solvents. Load rates 1 to 20 gpt. Nonionic
PC-550 Oil soluble paraffin control product containing wax crystal modifiers, dispersants & polar solvents. Load rates 1 to 20 gpt. Nonionic
FSW-4100 Mud Clean Out Agent/Surfactant for well bore preflush. Also used as wetting agent/surface tension reducer for acidizing, stimulation & fracturing. Load rates 2 to 5 gpt. Nonionic
SP-900 Emulsion co-polymer for mud flush agent, friction reducer and viscosifier. Nonionic
SP-901 Emulsion co-polymer for mud flush agent, friction reducer, clay stabilizer & fresh water viscosifier. Load rates 1 to 2 gpt. Anionic
SP-902 Emulsion co-polymer for acid viscosity, clay stabilizer and friction reducer. Load rates 1 to 2 gpt. Cationic
SP-903 Multi-purpose additive for acidizing, fracturing & squeeze. Friction reducer, non- emulsifier, wetting agent, foaming agent, corrosion inhibitor, bacteria dispersion. Load rates 1 to 3 gpt. Cationic
SP-904 Linear guar gum for viscosifying/thickening agent for water based fracturing. Load rates 20 to 40 lbs/1,000 b gallons Nonionic
SP-905 pH buffer for guar cross linked frac fluids. Load rate of 1 gpt provides a pH of ~9.0. Cationic
SP-906 Borate cross link agent for guar & modified guar frac fluids. Provides high viscosity gel. Load rates 1.5 to 2.5 gpt. Cationic
LEB Liquid enzyme breaker for borate cross linked guar frac fluids. Typical load rates of 0.125 to 0.5 gpt. Cationic
SP-908 Coal seam surfactant for use in fracturing. Typical load rates of 1 to 2 gpt. Nonionic
SP-910 Mud thinning agent for use in mud flush treatments. Typical load rates of 200 to 300 lbs per 1000 gallons.
IronSta 8004 High performance iron sequesterant/chelant for acidizing & fracturing. For ferric & ferrous iron. Load rates 2 to 5 gpt. Nonionic
SP-922 Sulfide cracking agent for HCl, HF, mud and organic acids. Rapidly complexes to remove H2S from aqueous and gas streams. Load rates 1 to 3 gpt. Cationic
SP-947 Water immiscible defoamer for foam prevention/dissipation. For acidizing, stimulation, chemical cleaning & cementing. Load rates 0.25 to 1.5 gpt. Nonionic
SP-950 Citric Acid Economical iron sequesterant for ferric and/or ferrous iron up to 150°F. Load rates from 5 to 10 gpt. 5 gpt will sequester 1,000 ppm dissolved iron. Nonionic
SP-980 Acetic Acid Winterized acetic acid for acidizing & fracturing. Also functions as iron chelator. Load rates of 5 to 10 gpt in mineral acids, or may be used alone for deeper acid penetration. Cationic
SP-985 Water soluble packer fluid corrosion inhibitor. Load rate range from 2 to 3 gpt. Cationic
SR-400 Hydrocarbon mitigation surfactant for industrial cleaning, hydroblasting and bioremediation. Also functions as paraffin dispersant, emulsifier, degreaser and cleaner. Load rates of 2 to 6% in water Nonionic
SR-401 Water soluble wetting agent/surface tension reducer for acidizing, stimulation & fracturing. Load rates 2 to 5 gpt. Nonionic
SR-403 Water miscible wetting agent/surfactant. Disperses hydrocarbons/paraffin/sludge. May be used to break down emulsion and water blocks. Enhances acid penetration. Load rates 1 to 3 gpt. Nonionic
SR-404 Load recovery surfactant/foaming agent. Load rates 2 to 10 gpt. Nonionic
SR-405 Wetting agent/surface tension reducer for stimulation and acidizing. May be used to break down emulsion & water blocks. Also functions as non-emulsifier at low concentrations. Load rates 1 to 3 gpt. Nonionic
SR-440 Micellar wetting agent/surface tension reducer for acidizing/stimulation and break down fluid. Load rates 1 to3 gpt, 15 to 25 gpt in break down fluid. Nonionic
SS-601 Water soluble silt suspending agent/surface tension reducer for cementing, acidizing & cementing. Excellent hole conditioning agent for well bore pre-flush prior to cementing. Load rates 2 to 5 gpt. Nonionic
BioCide 320 E.P.A. registered biocide. Recommended concentrations of 50 to 500 ppm for batch treatments. Cationic
SCW-7523 Broad spectrum scale inhibitor. Load rate 2 to 5 gpt. Anionic
----------------------------------------